喷油器校验台
Injector Adjusting
Machine

I . USEM

NT-1 type fuel injector tester is a special instrument for the performance test of the fuel injector assembly and the fuel injector nozzles. It is suitable for the following performance tests:
Initiative injecting press of injector
Sealing function of the fuel injector assembly
Fuel spray characteristics
The sealing function with the conical surface of the injector nozzles
Sliding motion of the needle valve in the valve body

II. MAIN TECHNICAL DATA

Highest pressure 40Mpa(or 60 Mpa)
Volume of fuel box 1500ml
Dimensions 450×300×200mm
Weight 5kg

III. OPERATION

Preparation
Fix the fuel injector tester with bolts on the work stand, install the hand whee
(8), clean the fuel box (5) and then pour fuel in it. Choose suitable high press oil pipe and connect the injector to be tested and the tester with it. Tighten the hand wheel (8) on the press gauge valve (7), loose the exhausting bolt (3) put the driving bar (1) into the tube-shaped lever, then push it down fast for many times to wash the fuel injector and discharge air and then tighten it again. At last loose the hand wheel (8).
2. Test for the performance of the fuel injector assembly and the fuel injector nozzle mating pair.
Test should be done according to the related technical specifications.

IV. ACCESSORIES

1. Hand wheel (one piece)
2. High press oil pipe (two piece)

V. NOTICE

During the test if the fuel can not come out, please loose the exhausting bolt (3) and discharge air
If found the press gauge controller leaking oil in the operation, please tighten the blocking nut (9) in proper on the press gauge valve (7) until no oil leakage.

The outside view of tester
1. Hand bar
2. Pump housing
3. Exhausting bolt

4. Four vents
5. Oil box
6. Press gauge (0-8700Ib/in2, 0-600bar)
7.Press gauge valve controller
8.Handle

9.Shaft locking nut
10.Hight press oil tube

11.Limit bolt


    
China Jiangsu Province ICP sets up a file the number: 06040937-1
Copyright (C) 无锡康瑞燃油喷射配件有限公司 Wuxi Comry Diesel Fuel Injection Systems Parts Co., Ltd. All reserved
无锡康瑞燃油喷射配件有限公司新地址:江苏省无锡市凤宾路100号,联东优谷39—8(39幢一8号门面)座机:0086 510 83152128/83152177和39-616(39幢一616室)电话:(0510-83736977)。 总经理:0086-13906191266
District 39—8,NO.100Feng bin Road ,Wuxi Jiangsu,China。 Tel:0086 51083152128/510 83736977. Fax:0086 510 83152177。 E—mail:zycomry@aliyun.com
Web:www.comry.com.cn / www.comrypump.com 苏ICP备06040937号-1